What Are the Precautions for Using the Fall Arrester

What Are the Precautions for Using the Fall Arrester

1. the Main Rope Must Be Correctly Selected and Mixed Use is Strictly Prohibited. the Self-locking Device Must Be Installed Correctly, and the Roller (warped Part) is on the Upper Part.

2. Before Installation, Please Exit the Safety Screw and Exit the Pawl and Roller Assembly in a Counterclockwise Direction According to the Opening Direction of the Pawl Shaft. After Installing the Main Rope, Install It Clockwise According to the Opening Direction. then Close the Fuse and Screw in the Fuse Screw (not Too Tight).

3. After the Main Rope is Installed, the Upper and Lower Flexibility of the Self-locking Device Shall Be Checked. if the Self-locking Device Does Not Slide Flexibly, the Half Tension Spring Can Be Adjusted Appropriately. and Try Locking for 1 ~ 3 Times to Ensure the Locking Function. if Any Abnormality is Found, It Must Be Stopped; and Contact the Factory (within One-year Service Life), and It is Strictly Prohibited to Load, Unload and Repair Without Permission.

4. After One Year of Use, 1 ~ 2 Self-locking Devices with Large Wear Shall Be Selected and Subjected to Free Fall Impact Test with 80kg Weight. if There is No Abnormality, This Batch Can Continue to Be Used for 3 Months. Thereafter, the Test Shall Be Carried out Every 3 Months According to the Use. Products That Have Been Tested or Impacted by Heavy Objects Shall Not Be Used.