Why choose the hanging point of safety fall arrester

Safety fall arrester is an important protective tool to protect the lives of high-altitude workers. However, wearing fall arrester during work can not fully ensure the life safety of construction workers. This is because the fall arrester needs to be hung on a fixed point during use, If the fixed point or the ladder climbed by workers is not firm, high-altitude falling accidents will occur.

The hanging point of safety fall arrester is equally important. Therefore, enterprises, institutions and factories will regularly check the use of their own fall arresters. After inspection, the following problems are found:

1. On the climbing vertical ladder, the rope used to hang the hanging ring on the fall arrester is seriously damaged; 2. If the suspension point of the fall arrester is too low, it shall be shifted to the upper steel beam, and the specification shall be changed to 5M or 10m long; 3. When workers climb the ladder, the ladder has no handrail, which is highly dangerous.

After the above problems are found through inspection, the safety supervision department will immediately require the corresponding teams, such as the lifting team, to make rectification within a time limit to ensure that the safety production is implemented in place and implemented to the people, so as to give full play to the safety role of the safety fall arrester.